Specifications in detail
Panel
Type
LCOS reflective display, TFT Active Matrix
Size and Number
0.71” diagonal, 3 panels
Aspect Ratio
16:10
Native Resolution
1920 x 1200 (WUXGA), 2304000 pixels
OPTICS
Lamp Type
430W super high pressure lamp
Lens F Number and Focal Length
F1.89 – F2.65; f=23.0 – 34.5mm (Standard Lens)
Zoom Magnification and Control
1.5x Motorised (Standard Lens)
Focus control
Motorised
Lens Shift
Vertical: -15% to +55%, Motorised (Standard lens)
Horizontal: +/-10%, Motorised
IMAGE AND AUDIO
Colour Brightness
XEED WUX5800: 5,800 lumens
XEED WUX6700: 6,700 lumens
XEED WUX7500: 7,500 lumens
Colour Brightness power save mode
Power save 1: 5,200 lumens
Power save 2: 4,500 lumens
Brightness Uniformity
90% (Standard lens)
Native Contrast Ratio
2000:1 (full on / full off)
Projection Distance Coverage
0.44m – 89.0m (Depending on lens)
Screen size
40” – 600” (86 x 54cm – 1292 x 808cm Depending on lens)
Projection Ratio
1.49:1 – 2.24:1 (Standard lens)
Digital Zoom Magnification
1x – 12x
Keystone Correction Range
Vertical: +/-20° Horizontal: +/-20°
Digital RGB Compatibility
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
Analogue RGB Compatibility
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
Digital Video Scan Systems
1080p / 1080i / 720p / 576p / 480p
Component Video Scan Systems
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
HDBBaseT input
Equivalent to the input of digital RGB and digital video
USB data transfer
JPEG still image
Network communication
NMPJ – ‘Network Multiprojection’ screen transfer (Canon protocol)
Built-in Speaker
1W RMS, Monaural
PORTS AND CONNECTORS
Digital RGB / Analogue RGB Input 1
DVI-I 29-pin
Digital Video and Audio Input
HDMI (incl Deep Colour)
DisplayPort
HDBaseT input
RJ-45 (HDBaseT) Image, audio, control signal & network
Analogue RGB Input 2
Mini D-Sub 15-pin (Component via optional adaptor cable)
Audio Input 1
3.5mm stereo mini-jack
Audio Output
3.5mm stereo mini-jack (variable level)
USB Port
USB Type A
Service Port / Projector Control
Mini D-Sub 9-pin
Network Port
RJ-45 HDBaseT input (1000BASE-T / 100BASE-TX / 10BASE-T)
Wi-Fi transmission standard
IEEE 802.11b / g / n
Wi-Fi transmission distance
Up to 25m (no electric wave interference / clear view to access point)
Wi-Fi encryption
Open / WEP / WPA-PSK TKIP / WPA-PSK AES / WPA2-PSK TKIP / WPA2-PSK AES
Wi-FI Connection Modes
Infrastructure mode PjAP (Projector Accss Point) mode
Wi-Fi certification and WPS
Acquired. Push Button Method (PBC) & PIN code method (PIN)
Wired Remote Control
3.5mm stereo mini-jack
MECHANISMS
Elevation Mechanism
Four rotary feet, extension length 14.6mm.
Maximum angle of elevation +/-1.8°
RATINGS
Dimensions (W x H x D)
480mm x 196mm x 515mm (excluding protrusions)
Weight
13kg (without lens)
Power Source
100V – 240V AC, 50/60Hz
Power Consumption
XEED WUX5800: 449 W
XEED WUX6700: 497 W
XEED WUX7500: 550 W
Standby: 0.3-2.0W (depending on HDBaseT and network settings)
Power consumption power save
Power save 1: 394 W
Power save 2: 368 W
Heat Dissipation
XEED WUX5800: 1531 BTU/h
XEED WUX6700: 1694 BTU/h
XEED WUX7500: 1876 BTU/h
Power save 1: 1343 BTU/h
Power save 2: 1254 BTU/h
Lamp Life
XEED WUX5800: 3,500 / 4,000 hours
XEED WUX6700: 3,000 / 4,000 hours
XEED WUX7500: 3,000 / 4,000 hours
Noise Level (normal)
XEED WUX5800: 35 dB
XEED WUX6700: 37 dB
XEED WUX7500: 40 dB
Noise level (power save)
Power save 1: 29 dB
Power save 2: 27 dB
Operating Environment
0°C to +40°C (20%RH – 85%RH)
Storage Environment
-20°C to +60°C
Warranty
3 years (warranty information)
All data is based on Canon standard testing methods except where indicated
Subject to change without notice.
HDBaseT confirmed list: lamp model
| 1 | 2 | 3 | 4 | 5 | 6 |
HDBASET CONFIRMED LIST: LAMP MODEL
| Manufacturer | Model name | Image | Audio | LAN | Serial |
|---|---|---|---|---|---|
| Crestron | DM-TX-201C | Yes | Yes | Yes | – |
| DM-TX-401C | Yes | Yes | Yes | – | |
| AMX | DX-TX | Yes*1 | Yes | Yes | – |
| Kramer | TP-581T | Yes*2 | Yes | Yes | Yes |
| TP-582T | Yes*2 | Yes | Yes | Yes | |
| Extron*3 | XTP T USW 103 | Yes | Yes | Yes*4 | Yes*4 |
| Gefen | GEF-HDCAT5-ELRPOL | Yes*2 | Yes | Yes*4 | – |
| Atlona | AT-HDTX-RSNET | Yes*2 | Yes | Yes | – |
| CYP | PU-507-KIT | Yes*2 | Yes | Yes | Yes |
* Yes: Available, No: Not available, -: No function in Tx
* 1: When some input devices are connected, the image may not be displayed correctly
* 2: When some input devices are connected, the image may not be displayed with the expected resolution
* 3: Setting Extron XTP “On” is required
* 4: Only standBy power setting “Normal” can enable communication at the time of PJ standBy
Reviews
There are no reviews yet.