XEED WUX500ST

Send us Enquiry!

Contact Form Demo (#1)

Specifications in detail

Panel

Type

LCOS reflective display, TFT Active Matrix

Size and Number

0.71” diagonal, 3 panels

Aspect Ratio

16:10

Native Resolution

1920 x 1200 (WUXGA), 2304000 pixels

OPTICS

Lamp Type

280W NSHA

Lens F Number and Focal Length

F2.7; f=8.8mm

Zoom Magnification and Control

1.0x Optical (fixed)

Focus control

Manual

Lens Shift

 

Vertical: 0% to +75%, Manual

Horizontal: +/-10%, Manual

 

IMAGE AND AUDIO

Brightness

5000 lumens (3460 lumens in Eco Mode)

Colour Brightness

5000 lumens (3460 lumens in Eco Mode)

Brightness Uniformity

80%

Native Contrast Ratio

2000:1

Projection Distance Coverage

0.35m – 3.64m (1.2m for 100″ image)

Screen size

30” – 300” (65 x 40cm – 646 x 404cm)

Throw Ratio

0.56 : 1

Digital Zoom Magnification

12x max

Keystone Correction Range

 

Vertical: +/-12°

Horizontal: +/-12°

 

Digital RGB Compatibility

WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA

Analogue RGB Compatibility

WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA

Digital Video Scan Systems

1080p / 1080i / 720p / 576p / 480p

Component Video Scan Systems

1080p / 1080i / 720p / 576p / 576i / 480p / 480i

HDBaseT input

Equivalent to the input for HDMI terminal

Image Modes (Depends on input)

Standard / Presentation / Dynamic / Photo/sRGB / Video / User 1-5 / DICOM sim (only available on DICOM projector model)

USB Supported File Types

JPEG still image

Built-in Speaker

5.0W RMS, Monaural

PORTS AND CONNECTORS

Digital RGB Input

DVI-I 29-pin (shared)

Digital Video and Audio Input

HDMI (supporting Deep Colour)

Analogue RGB Input 1

DVI-I 29-pin (shared)

Analogue RGB Input 2

Mini D-Sub 15-pin (Component via optional adaptor cable)

Audio Input 1

3.5mm stereo mini-jack

Audio Input 2

3.5mm stereo mini-jack

Audio Output

3.5mm stereo mini-jack (variable level)

USB Port

USB Type A

Service Port / RS232C Control

Mini D-Sub 9-pin

Network Port

RJ-45 (1000BASE-T / 100BASE-TX / 10BASE-T)

HDBaseT

RJ-45 (HDBaseT) – see table below

Wired Remote Control

3.5mm stereo mini-jack

wifi

IEEE 802.11b / g / n. Approx 25m. Infrastructure mode & PjAP mode

Wi-Fi WPS

Push button method (PBS) & PIN code method (PIN)

Wi-Fi encryption

Open / WEP / WPA-PSK TKIP / WPA-PSK AES / WPA2-PSK TKIP / WPA2-PSK AES

MECHANISMS

Front Elevation Mechanism

Two rotary feet, 6° maximum image elevation

RATINGS

Dimensions (W x H x D)

337mm x 136mm x 415mm

Weight

6.3kg

Power Source

100V – 240V AC, 50/60Hz

Power Consumption

Normal Mode: 395W / Eco Mode: 295W / Standby: 1.8W / Standby (LAN & HDBaseT off): 0.2W

Lamp Life

3000 hr / 5000 hr (Eco mode)

Noise Level

38dBA / 30dBA (Eco mode)

Operating Environment

0°C to +40°C, 20%RH – 85%RH

Storage Environment

-20°C to +60°C

Warranty

All data is based on Canon standard testing methods except where indicated

Subject to change without notice.

HDBaseT Transmitter operation confirmation chart

A transmitter and a receiver is required to create an HDBaseT system. Normally, HDBaseT entails an external receiver and transmitter, and if these devices are made by the same manufacturer, their performance is usually guaranteed. However, because WUX500ST has a built-in receiver, the receiver and transmitter used will be made by different manufacturers. For this reason, in the list below, confirm that the transmitter you are using works with the projector before use. (Canon does not guarantee operations)

Brand Model Video Audio LAN Serial
Crestron DM-TX-201C Yes Yes Yes No
DM-TX-401C Yes Yes Yes No
AMX DX-TX Yes Yes Yes Yes
Kramer TP-581T Yes※1 Yes Yes Yes
TP-582T Yes Yes Yes Yes
Gefen GEF-HDCAT5-ELRPOL Yes Yes No※2 No
Atlona AT-HDTX-RSNET Yes※1 Yes Yes No
CYP PU-507-KIT Yes※1 Yes Yes Yes
IDK HDC-TH100-C Yes Yes Yes No※3
IMAGENIX CRO-DE20TX Yes Yes No No※3

※1 When a certain input device is connected, the picture may not be displayed in intended resolution.

※2 LAN transmission disabled when the projector is in Standby mode (Transmitter is incompatible with LPPF2 mode)

※3 Serial transmission disabled when the projector is in Standby mode.

Reviews

There are no reviews yet.

Be the first to review “XEED WUX500ST”

Your email address will not be published. Required fields are marked *

Support

Sorry, we aren’t online at the moment. Leave a message and we’ll get back to you.

Product Enquire

Contact Form Demo (#1)

Request a Quote